 |
QSFP+ SR4 MPO 100M MMF 40G 베이스 송수신기 모듈 JG325B JG709A QFX-QSFP-40G-SR4
제품 상세 정보:
| 원래 장소: | 중국 |
| 브랜드 이름: | Takfly |
| 인증: | CE,ROHS,FCC,REACH,ISO9001,ISO14001 |
| 모델 번호: | TKQSFP40GSR4 |
결제 및 배송 조건:
| 최소 주문 수량: | 1 PC |
|---|---|
| 가격: | USD35/pcs ~ USD45/pcs |
| 포장 세부 사항: | 물집 박스 + 스포네 + 통 |
| 배달 시간: | 3-5 일로 일합니다 |
| 지불 조건: | 전신환, 웨스턴 유니온, 머니그램, 페이팔, L/C (신용장) |
| 공급 능력: | 30000 PC / 달 |
|
상세 정보 |
|||
| 속도: | 40Gbps | 전송거리: | 100m |
|---|---|---|---|
| 사고 방식: | 850nm | 섬유 항구: | MPO |
| 하이 라이트: | JG325B 스프피 송수신기 모듈,QFX-QSFP-40G-SR4,JG709A 스프피 송수신기 모듈 |
||
제품 설명
40G QSFP+ SR4 MPO 100M MMF 40GBASE Transceiver Module, QSFP-40G-SR4, JG325B, JG709A, QFX-QSFP-40G-SR4
Description
The 40G QSFP+ SR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range Multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Takfly Avago Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features
- Four-channel full-duplex transceiver modules
- Transmission data rate up to 10.3Gbit/s per channel
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- Low power consumption <1.5W
- Housing isolated from connector ground
- Operating case temperature 0°C to +70°C
- 3.3V power supply voltage
- RoHS 6 compliant
- Hot Pluggable QSFP form factor
- Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
- Single MPO connector receptacle
- Built-in digital diagnostic functions
Application
- 40GBASE-SR4 40G Ethernet
- Datacom/Telecom switch & router connections
- Data Aggregation and Backplane Applications
- Proprietary Protocol and Density Applications
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | -0.3 | 3.6 | V |
| Input Voltage | Vin | -0.3 | Vcc+0.3 | V |
| Storage Temperature | Tst | -20 | 85 | ºC |
| Case Operating Temperature | Top | 0 | 70 | ºC |
| Humidity(non-condensing) | Rh | 5 | 95 |
% |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Transmitter | ||||||
| Centre Wavelength | λc | 840 | 850 | 860 | nm | - |
| RMS spectral width | ∆λ | - | - | 0.65 | nm | - |
| Average launch power, each lane | Pout | -7.5 | - | 2.5 | dBm | - |
| Difference in launch power between any two lanes (OMA) | 4 | dB | - | |||
| Extinction Ratio | ER | 3 | - | - | dB | - |
| Peak power, each lane | 4 | dBm | - | |||
| ransmitter and dispersion | TDP | 3.5 | dB | - | ||
| penalty (TDP), each lane | ||||||
| Average launch power of OFF | -30 | dB | - | |||
| transmitter, each lane | ||||||
| Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 | SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | Hit Ratio = 5x10-5 | ||||
| Receiver | ||||||
| Centre Wavelength | λc | 840 | 850 | 860 | nm | - |
| Stressed receiver sensitivity in OMA, | -5.4 | dBm | 1 | |||
| each lane | ||||||
| Maximum Average power at receiver input, each lane | 2.4 | dBm | - | |||
| Receiver Reflectance | -12 | dB | - | |||
| Peak power, each lane | 4 | dBm | - | |||
| LOS Assert | -30 | dBm | - | |||
| LOS De-Assert – OMA | -7.5 | dBm | - | |||
| LOS Hysteresis | 0.5 | dB | - | |||
Compatibility
All of Takfly's transceiver modules are open sourced, can be coded to be fully compatible with major brands' products and devices, such as Intel, Dell, , Finisar, Arista, HP, Mellanox, Juniper, HUAWEI, H3C, etc. For other brands' devices, please specify when ordering so that we can write corresponding codes for your easy application.
Dimension
FAQ:
Q: Do you provide OEM service ?
A: Yes, we can print your logo or label on the products or on the box.
Q: Can you provide free samples ?
A: Some of low value samples can be free for you, but you need pay for the shipping cost.
Q: How can you guarentee the quality ?
A: Build on our perfect quality management system, all of our products were 100% tested before the shipment.
Q: What is your delivery time ?
A: Generally, sample: 3~5 working days. Formal order: 7-10 working days.
Q: What's your payment terms ?
A: We accept T/T, Western Union, Paypal, L/C
For samples: 100% payment. Formal order: 30%~100% as deposit, balance payment before shipment.